Skip to content
Equipment · Columns

Columns and towers, with their internals.

Distillation, stripping and absorption columns with internals to your process design. Single segments up to 27.8 m have left our works.

The range

Shell, internals and supports from one works.

Column internals and nozzle orientation are reviewed for operability and maintenance before fabrication starts.

Outline of a column with platforms and ladders
Column. Illustration, not to scale.
  • Distillation columns. Tray or packed, in one piece or in flanged sections.
  • Stripper and absorption columns. For gas–liquid contact duties.
  • Packed columns. With support grids, bed limiters and distributors.
  • Jacketed reactor columns. For continuous processes.
  • Column internals. Chain baffles and column internals fabricated in-house.

Illustration, not to scale

Inside a column

Separation, section by section.

Distillation, stripper and absorption columns with their internals, in stainless, duplex and nickel alloys.

Scroll to open it up.

Shell and skirt01 / 05

1Shell sections
Flanged or welded sections; single segments to 27.8 m delivered.
2Skirt
Skirt support with base ring, anchor chairs and access opening.
3Nozzles & manholes
Nozzle orientation reviewed for operability and maintenance.

Tray section02 / 05

4Trays
Trays and other column internals fabricated in-house.
5Downcomers & weirs
Carry the liquid from each tray to the one below.

Packed section03 / 05

6Packed bed
Random or structured packing on a support grid, held by a bed limiter.
7Liquid distributor
Spreads the reflux evenly over the bed.

Vapour and liquid04 / 05

Counter-current contact.

Vapour rises through the trays and the packing while liquid runs down across them; the internals are reviewed with your process team for operability and maintenance.

  • Vapour, rising
  • Liquid, running down

The whole column05 / 05

Columns and internals from one works.

Designed to ASME Section VIII and EN 13445, inspected stage by stage, and delivered with a complete dossier.

What we build

Columns by duty.

Distillation columns

Tray or packed columns to your process design.

Stripper and absorption columns

Columns for stripping and absorption service.

Jacketed reactor columns

Jacketed reactor columns for continuous processes.

Column internals

Chain baffles and column internals fabricated in-house.

From our record

References, not limits.

27.8 mLongest single segment delivered
Inconel 600Column material in our references
SS 316LColumn material in our references
From our works

Built here.

Long column with nozzles in the fabrication bay
Long column with nozzles in the fabrication bay
Column with built-in exchanger
Column with built-in exchanger
Third-party stage inspection of a column
Third-party stage inspection of a column
For engineers who check

Codes, materials and inspection.

  • Codes and standards. ASME Section VIII Div. 1 and 2 with U stamp and National Board registration, EN 13445, PD 5500, AD 2000-Merkblatt with HP0, PED 2014/68/EU and IBR 1950.
  • Materials of construction. Stainless steels including 304L, 316L, 316Ti and 904L; duplex and super-duplex; Hastelloy C-276, C-22 and C-2000; Inconel, Incoloy, Monel, Alloy 20 and nickel; carbon and low-alloy steels, in solid or explosion-bonded clad construction.
  • Inspection, testing and documents. Approved ITP and QAP, stage inspection by third-party agencies, NDE by in-house ASME Level II personnel, PMI on every finished item, hydrostatic or pneumatic testing and a complete dossier with material traceability.