Skip to content
Equipment · Filters

Filters that separate cleanly and clean easily.

Pressure filters for solid–liquid separation, with polished contact parts and designs that discharge cleanly and clean easily.

The range

Pressure filters for process plants.

Filter area, cake handling and discharge, cloth or mesh support, sealing and cleaning access are reviewed with your process team.

Outline of a pressure nutsche filter on a trolley
Pressure nutsche filter. Illustration, not to scale.
  • Pressure nutsche filters. Polished contact parts and cleanable designs for pharma duty.
  • Pressure filters. Solid–liquid separation under pressure, sized to your batch.
  • Leaf filters. For clarification.
  • Filter vessels. In duplex and stainless steels.

Illustration, not to scale

Inside a pressure nutsche filter

Separates cleanly, cleans easily.

A pressure nutsche filter, part by part. Pressure filters, leaf filters and filter vessels are built in the same works.

Scroll to open it up.

Pressure body01 / 05

1Shell & dished cover
Contact parts can be mirror-polished or electropolished, with surface roughness (Ra) measured and recorded.
2Nozzles & sight glasses
Slurry inlet, pressurising gas, vent, sight glass and light glass on the cover.
3Legs & trolley
Pipe legs on a trolley frame with castors, so the filter can be moved to where it is needed.

Filter bottom02 / 05

4Filter cloth or mesh
Cloth or mesh support reviewed with your process team.
5Support plate
Perforated plate that carries the cloth and the cake.
6Bottom dish & filtrate outlet
Collects the filtrate and drains it completely.

Filtration03 / 05

Solid and liquid part under pressure.

Gas pressure drives the liquid through the cake, the cloth and the support plate; the solids stay on the cloth and the filtrate leaves through the bottom outlet. Filter area is sized to your batch.

  • Filtrate
  • Filter cake

Cover and cake04 / 05

7Swing bolts & cover lift
Swing eye-bolts release the cover; a hand-pump cylinder lifts it and swings it aside.
8Filter cake
With the cover open the cake is taken out and the cloth changed; sealing and cleaning access are reviewed for the duty.

The whole filter05 / 05

Sized to your batch.

Pressure nutsche filters for pharmaceutical, agrochemical and specialty-chemical duty, with polished contact parts and cleanable designs.

What we build

Filters by type.

Pressure nutsche filters

Polished contact parts and cleanable designs for pharma duty.

Pressure filters

Solid–liquid separation under pressure, sized to your batch.

Leaf filters

Leaf filters for clarification.

Filter vessels

Filter vessels in duplex and stainless steels.

From our record

References, not limits.

1,000 LFilter in our references
250 LPressure nutsche filter
DuplexFilter vessel material
From our works

Built here.

Pressure nutsche filters on their trolleys
Pressure nutsche filters on their trolleys
Pressure nutsche filter
Pressure nutsche filter
Pressure filter
Pressure filter
For engineers who check

Codes, materials and inspection.

  • Filtration design. Filter area, cake handling and discharge, cloth or mesh support, sealing and cleaning access are reviewed with your process team; contact parts can be mirror-polished or electropolished, with surface roughness (Ra) measured and recorded.
  • Codes and standards. ASME Section VIII Div. 1 and 2 with U stamp and National Board registration, EN 13445, PD 5500, AD 2000-Merkblatt with HP0, PED 2014/68/EU and IBR 1950.
  • Materials of construction. Stainless steels including 304L, 316L, 316Ti and 904L; duplex and super-duplex; Hastelloy C-276, C-22 and C-2000; Inconel, Incoloy, Monel, Alloy 20 and nickel; carbon and low-alloy steels, in solid or explosion-bonded clad construction.
  • Inspection, testing and documents. Approved ITP and QAP, stage inspection by third-party agencies, NDE by in-house ASME Level II personnel, PMI on every finished item, hydrostatic or pneumatic testing and a complete dossier with material traceability.