Skip to content
Equipment · Silos

Silos for powders and granules, to suit your site.

Silos for powders and granules, with the cone, structure and access to suit your site and material.

The range

Shell, cone, structure and access.

Tell us the material, its bulk density and how it flows, and what stands under the silo; the cone, the outlet and the structure follow from that.

Tall steel silos with a caged access ladder against a clear sky (representative photograph)
Steel silos with caged access ladders. Representative photograph.
  • Storage silos. For powders and granules.
  • Customized silos. Cone, outlet, structure and access to suit the site and the material.

Illustration, not to scale

Inside a silo

Stores it dry, lets it go cleanly.

A storage silo for powders and granules, part by part: shell, cone, discharge, structure and access.

Scroll to open it up.

Shell and roof01 / 05

1Shell
Sized for the material and the capacity you need to hold.
2Roof & manhole
Roof with manhole for inspection.
3Vent filter
Lets the air out during filling and keeps the dust in.

Cone and discharge02 / 05

4Cone hopper
The cone to suit how your material flows.
5Discharge valve
Outlet with valve, to suit what stands under the silo.

Structure and access03 / 05

6Ring beam & legs
The structure to suit your site.
7Ladder & handrail
Access to the roof for filling and inspection.

In service04 / 05

Filled from the top, drawn from the cone.

The level rises and falls with the plant. The cone and the outlet are laid out so that the material draws down evenly and the silo empties.

  • Stored material, drawing down

The whole silo05 / 05

Cone, structure and access to suit your site.

Silos for powders and granules, built in the same works as our tanks and vessels.

What we build

Silos to order.

Storage silos

Silos for powders and granules.

Customized silos

With the cone, structure and access to suit your site and material.

For engineers who check

Codes, materials and inspection.

  • Materials of construction. Stainless steels including 304L, 316L, 316Ti and 904L; duplex and super-duplex; Hastelloy C-276, C-22 and C-2000; Inconel, Incoloy, Monel, Alloy 20 and nickel; carbon and low-alloy steels, in solid or explosion-bonded clad construction.
  • Inspection, testing and documents. Approved ITP and QAP, stage inspection by third-party agencies, NDE by in-house ASME Level II personnel, PMI on every finished item, hydrostatic or pneumatic testing and a complete dossier with material traceability.