Skip to content
07

Customized equipment, engineered around your process.

When the equipment you need is not in a catalogue — clad and lined construction, special internals, lip-type and SR nozzles, bed-dryer plates and one-off process equipment.

Send your datasheet Technical details

What we build

Lip-type nozzles on a clad shell
Explosion-bonded clad equipment SS with Alloy C-2000, C-22 or C-276 cladding for reactors, columns and exchangers.
Lip-type nozzle on a limpeted shell
Lip-type & SR nozzles Lip-type and stress-relieved nozzle set-ups on heavy shells.
Radial internal pipes inside a vessel
Special internals & coils Radial coils, internal coil bundles and special internals.
Vessel with outside vertical coils
Outside vertical coils Reaction vessels with outside vertical coils for anhydrous processes.
From our record — references, not limits

Already built in our works

20 KL Explosion-bonded reactor body SS 304 + Alloy C-22
350 °C Inconel 600 gas-phase reactor
6 KL Cryogenic C-2000 clad reactor
≈ ₹1 crore Customer saving from a redesign
Outline drawing of a loop reactor: two horizontal pressure vessels, one above the other, joined by two connecting nozzles and carried on saddles
Loop reactor. Illustration, not to scale.
Engineered to order

A loop reactor, built as one unit.

Two horizontal pressure vessels, one above the other, joined by two flanged connecting nozzles so the contents circulate between them. Both shells carry limpet coils, and the pair is mounted together on saddles.

Equipment in this solution

Any equipment type, engineered to order.

What we build under this heading, with the page and the detailed enquiry form for each type.

Pressure vessel in the Steelcon works

Pressure vessels

Vertical or horizontal pressure vessels for gas and liquid service, with jackets or coils where the process needs heat transfer. Built to ASME Section VIII, PED, AD 2000 or IBR as specified. Design pressures to about 215 bar are in our references.

  • Vertical pressure vessels
  • Horizontal pressure vessels
  • Receivers
  • Separators
  • Process vessels and pots
  • Jacketed and limpet-coil vessels
  • High-pressure vessels
Regenerator in the fabrication bay: top head with its nozzles

Regenerators & tubular catalytic reactors

Regenerators for continuous processes, and multi-tubular reactors in which the reaction runs in catalyst-filled tubes while a heat-transfer medium round them holds the temperature. References include a 3.5 m, 8,800-tube formaldehyde reactor.

  • Regenerators
  • Multi-tubular reactors
  • Fixed tube-sheets with expansion joint
  • Shell-side ring channels and baffles
  • Channels with manways
Vertical agitator test bench

Agitator assemblies

Agitators designed for the duty: impeller selection, shaft and seal design, drive sizing, and a trial run on our vertical test bench before dispatch. Drives to 150 HP are in our references.

  • Hydrofoil
  • Pitched-blade turbine
  • Gas dispersion and gas induction
  • Cowl disc
  • Pipe anchor
  • Helical ribbon
  • Counter-flow multi-stage
Pressure nutsche filters

Filters

Pressure filters for solid–liquid separation, with polished contact parts and designs that discharge cleanly and clean easily.

  • Pressure nutsche filters
  • Pressure filters
  • Leaf filters
  • Filter vessels in duplex and stainless steel
Cowl-disc disperser

Mixers & blenders

Horizontal blenders, mixing vessels and high-speed dispersers for paints, resins, inks and speciality chemicals, built as complete machines with seal, drive and frame.

  • Horizontal blenders
  • Mixing vessels
  • Cowl-disc dispersers
  • Sand mills

Illustration, not to scale

Engineered to order

A loop reactor, built as one unit.

Two horizontal pressure vessels, one above the other, joined by two connecting nozzles and carried together on saddles.

Scroll to open it up.

Two vessels01 / 05

1Lower vessel
Horizontal pressure vessel with dished ends.
2Upper vessel
A second horizontal vessel mounted above the first.
3Process nozzles
On the shells and the heads, to suit your piping.

Connecting nozzles02 / 05

4Connecting nozzles
Two flanged nozzles join the vessels, so the contents circulate from one vessel to the other and back. The markers show the loop.

Heat transfer03 / 05

5Limpet coils
Half-pipe coils on both shells for heating or cooling.

Saddles and supports04 / 05

6Saddles
The lower vessel rests on two saddles.
7Intermediate supports
Carry the upper vessel on the lower one.

Customized equipment05 / 05

Built to your process design.

Equipment outside the standard types is engineered to order, to the code you specify, with stage inspection and a complete dossier.

Technical details

For engineers who check: open a panel for the detail behind each claim.

ASME BPVC Section VIII Div. 1 & 2 with U stamp and National Board registration, EN 13445, PD 5500, TEMA, API 650, IS 803, AD 2000-Merkblatt with HP0, PED 2014/68/EU (Annex I 3.1, Module A2 under CE 0045, Module G), ATEX 2014/34/EU and IBR 1950.

Project examples

One-off and special equipment we have delivered.

Detailed references are available on request.

See all project examples →
  • Cryogenic reactor, SS 304 + Alloy C-2000 explosion-bonded
  • Reactor body and column, SS 304 + Alloy C-22 explosion-bonded
  • FMO gas-phase reactor in Inconel 600
  • Alloy C-276 clad reactors, 8 and 10 KL
  • Loop reactors

Have a special requirement?

Send the datasheet or drawing — the RFQ form arrives with this solution already selected.

Send your datasheet

No datasheet yet? Enter the design data you have, section by section, and we will work out the rest.

Technical enquiry form