Skip to content
01

Reaction & pressure equipment, built for your chemistry.

Reactors, hydrogenators, autoclaves and pressure vessels in stainless, duplex and nickel alloys — designed to ASME, PED, AD 2000 and IBR, and reviewed for how you will operate them.

Send your datasheet Technical details

What we build

Limpeted reactor shell
Reactors Jacketed, limpet-coil and internal-coil reactors; cryogenic and cGMP designs.
Limpeted hydrogenator wrapped for dispatch
Hydrogenators & autoclaves Gas-induction and high-pressure hydrogenation systems.
Limpeted horizontal pressure vessel
Pressure vessels Receivers, separators, pots and process vessels to ASME, PED, AD 2000 and IBR.
Row of large tube sheets for multi-tubular heat exchangers
Tubular catalytic reactors Multi-tubular reactors — references include a 3.5 m, 8,800-tube formaldehyde reactor.
Around the reactor

One works for the equipment around it.

A reactor rarely arrives alone. The vessels, exchangers, columns and filters that stand beside it are built in the same works, to the codes your project specifies.

From our record — references, not limits

Already built in our works

156 kL Largest pressure vessel / tank 5,000 mm ID
90 kL Largest reactor body (gross)
~215 bar Highest design pressure
45 mm Heavy-wall shell thickness Reactors and autoclaves
Equipment in this solution

The equipment types behind it.

What we build under this heading, with the page and the detailed enquiry form for each type.

Pressure vessel in the Steelcon works

Pressure vessels

Vertical or horizontal pressure vessels for gas and liquid service, with jackets or coils where the process needs heat transfer. Built to ASME Section VIII, PED, AD 2000 or IBR as specified. Design pressures to about 215 bar are in our references.

  • Vertical pressure vessels
  • Horizontal pressure vessels
  • Receivers
  • Separators
  • Process vessels and pots
  • Jacketed and limpet-coil vessels
  • High-pressure vessels
Regenerator in the fabrication bay: top head with its nozzles

Regenerators & tubular catalytic reactors

Regenerators for continuous processes, and multi-tubular reactors in which the reaction runs in catalyst-filled tubes while a heat-transfer medium round them holds the temperature. References include a 3.5 m, 8,800-tube formaldehyde reactor.

  • Regenerators
  • Multi-tubular reactors
  • Fixed tube-sheets with expansion joint
  • Shell-side ring channels and baffles
  • Channels with manways

Illustration, not to scale

Inside a reaction vessel

Built for your chemistry.

A limpet-coil reactor with a top-entry agitator, part by part. Jacketed, half-pipe and internal-coil designs, hydrogenators and autoclaves follow the same logic.

Scroll to open it up.

Pressure envelope01 / 05

1Shell & dished heads
Stainless, duplex and nickel alloys, solid or explosion-bonded clad; designed to ASME, PED, AD 2000 and IBR.
2Nozzles & manway
Reviewed for how you will operate the reactor.
3Supports
Bracket lugs, legs or skirt, to suit the plant structure.

Heat transfer02 / 05

4Limpet coil
Limpet coil, half-pipe, conventional jacket and internal coil designs.
5Bottom-dish coil
The coil is carried over the bottom dish where the duty needs it.

Agitation03 / 05

6Agitator
Hydrofoil, PBT, gas-induction, Rushton, anchor and cowl-disc impellers.
7Baffles
Baffled or unbaffled, to suit the flow pattern.

Seal and drive04 / 05

8Shaft seal
Double mechanical seal or magnetic drive.
9Drive
Agitator running trials, balancing and alignment in our own works.

The whole reactor05 / 05

Pilot scale to 90 kL.

Reactors, hydrogenators, autoclaves and pressure vessels are built in the same works, to the codes your project specifies.

Technical details

For engineers who check: open a panel for the detail behind each claim.

ASME BPVC Section VIII Div. 1 & 2 with U stamp and National Board registration, EN 13445, PD 5500, TEMA, API 650, IS 803, AD 2000-Merkblatt with HP0, PED 2014/68/EU (Annex I 3.1, Module A2 under CE 0045, Module G), ATEX 2014/34/EU and IBR 1950.

Project examples

A few of the reactors and vessels we have delivered.

Detailed references are available on request.

See all project examples →
  • 156 kL limpeted vessel, 5,000 mm ID
  • 90 kL reactor body
  • Cryogenic reactor, SS 304 + Alloy C-2000 explosion-bonded
  • 20 KL reactor body, SS 304 + Alloy C-22 explosion-bonded
  • 32 KL limpeted reactor with 75 HP agitator

Have a reactor or vessel to quote?

Send the datasheet or drawing — the RFQ form arrives with this solution already selected.

Send your datasheet

No datasheet yet? Enter the design data you have, section by section, and we will work out the rest.

Technical enquiry form