
Storage tanks
Atmospheric and pressure storage, vertical or horizontal, plain, jacketed or agitated. The largest in our references is 156 kL.
Rotary vacuum dryers, bed dryers, storage tanks to API 650 and IS 803, M.L. tanks, silos and holding vessels.
What we build under this heading, with the page and the detailed enquiry form for each type.

Atmospheric and pressure storage, vertical or horizontal, plain, jacketed or agitated. The largest in our references is 156 kL.

Silos for powders and granules, with the cone, structure and access to suit your site and material.
Illustration, not to scale
Inside a storage tank
A vertical storage tank, part by part. Tanks to API 650 and IS 803, M.L. tanks, silos and holding vessels are built in the same works.
Scroll to open it up.
Shell and bottom01 / 05
Roof02 / 05
Nozzles and access03 / 05
In service04 / 05
Atmospheric and pressure storage; jackets, limpets and agitators are sized for holding temperature and mixing.
The whole tank05 / 05
The largest vessel built in our works so far is a 156 kL limpeted vessel of 5.0 m inside diameter.
For engineers who check: open a panel for the detail behind each claim.
ASME BPVC Section VIII Div. 1 & 2 with U stamp and National Board registration, EN 13445, PD 5500, TEMA, API 650, IS 803, AD 2000-Merkblatt with HP0, PED 2014/68/EU (Annex I 3.1, Module A2 under CE 0045, Module G), ATEX 2014/34/EU and IBR 1950.
Tanks to API 650 and IS 803, vessels to ASME VIII and EN 13445; jackets, limpets and agitators sized for holding temperature and mixing; dryer internals and bed plates reviewed for flow distribution and cleaning.
Stainless steels including 304L, 316L, 316Ti and 904L; duplex, super-duplex and hyper-duplex; Hastelloy C-276, C-22 and C-2000; Inconel, Incoloy, Monel, Alloy 20, Sanicro 28 and nickel; carbon and low-alloy steels — in solid or explosion-bonded clad construction, and many more related grades.
Approved ITP and QAP; stage inspection by third-party agencies; RT, UT, PT, MT and VT by in-house ASME NDE Level II personnel; PMI on every finished item; hydrostatic or pneumatic testing; a complete dossier with material traceability.
Detailed references are available on request.
See all project examples →Send the datasheet or drawing — the RFQ form arrives with this solution already selected.
No datasheet yet? Enter the design data you have, section by section, and we will work out the rest.
Technical enquiry form