Skip to content
Equipment · Mixers & blenders

Mixers and blenders, built around the product.

Horizontal blenders, mixing vessels and high-speed dispersers for paints, resins, inks and speciality chemicals, with the mixing element, seal and drive matched to the product.

The horizontal blender

A trough, two ribbons and a drive.

A horizontal blender turns a whole batch over without lifting it: ribbons on one shaft sweep a U-shaped trough, and the product leaves through a valve under the centre.

Outline of a horizontal ribbon blender on its frame, with gear motor and discharge valve
Horizontal blender. Illustration, not to scale.
  • U-trough and cover. Bolted cover with charging nozzle and inspection hatch.
  • Ribbon agitator. Outer and inner ribbons of opposite hand on one shaft.
  • Shaft seals and bearings. Seals at both end plates; bearings clear of the product.
  • Gear motor. FLP or non-FLP motor with gearbox, on a bracket at one end.
  • Discharge valve. Bottom outlet at the centre of the trough.
  • Frame. Trough and drive on one frame.

Illustration, not to scale

Inside a horizontal blender

One batch, turned over end to end.

A horizontal ribbon blender, part by part: trough, ribbons, seals and drive.

Scroll to open it up.

Trough and cover01 / 05

1U-trough
The ribbons sweep the trough with a close clearance.
2Cover & charging nozzle
Bolted cover with charging nozzle and inspection hatch.
3Discharge valve
Bottom outlet at the centre of the trough.

Ribbon agitator02 / 05

4Outer ribbon
Moves the product towards one end of the trough.
5Inner ribbon
Moves it back the other way.
6Shaft
Carried in bearings outside the trough.

Mixing action03 / 05

Two ribbons, two directions.

The outer ribbon carries the product one way along the trough wall and the inner ribbon returns it along the shaft, so the whole batch turns over.

  • Carried by the outer ribbon
  • Returned by the inner ribbon

Drive and seals04 / 05

7Gear motor
FLP or non-FLP motor with gearbox, sized for the product.
8Bearings & shaft seals
Seals at both end plates; the bearings stand clear of the product.
What we build

Mixers, blenders and dispersers.

Horizontal blenders

U-trough blenders with ribbon agitators for powders, pastes and slurries.

Mixing vessels

Vertical vessels with the agitator designed for the product.

Cowl-disc dispersers

High-speed dispersers for paints, resins and inks. Cowl-disc tanks running at 980 rpm are in our references.

Sand mills

Built with the mixing and dispersion equipment around them.

3D view of the ribbon agitator inside the trough of a horizontal blender
Outer and inner ribbons inside the trough. Illustration, not to scale.
Mixer or agitator assembly?

Two different things to ask us for.

A mixer or blender

A complete machine: trough or vessel, mixing element, seals, drive and frame, built and trial-run as one unit. This page.

An agitator assembly

The drive, seal, shaft and impellers for a reactor or vessel, new or existing, sized from the process duty.

For engineers who check

Materials and inspection.

  • Materials of construction. Stainless steels including 304L, 316L, 316Ti and 904L; duplex and super-duplex; Hastelloy C-276, C-22 and C-2000; Inconel, Incoloy, Monel, Alloy 20 and nickel; carbon and low-alloy steels, in solid or explosion-bonded clad construction.
  • Inspection, testing and documents. Approved ITP and QAP, stage inspection by third-party agencies, NDE by in-house ASME Level II personnel, PMI on every finished item, hydrostatic or pneumatic testing and a complete dossier with material traceability.

Have a mixer or blender to quote?