Skip to content
Equipment · Pressure vessels

Pressure vessels, vertical or horizontal.

Receivers, separators, process vessels and pots for gas and liquid service, with a jacket or coil where the process needs heat transfer. Built to ASME Section VIII, PED, AD 2000 or IBR as specified.

Two arrangements

The same vessel, built upright or lying down.

Which way a vessel stands is decided by the plant: headroom, floor space, drainage and how it is piped. The pressure parts, the code and the inspection are the same.

Outline of a vertical pressure vessel on legs
Vertical pressure vessel
On legs, bracket lugs or a skirt. Small footprint; drains through the bottom head.
Outline of a horizontal pressure vessel on saddles
Horizontal pressure vessel
On two saddles. Low height; easy access to nozzles and manway.

Illustration, not to scale

Inside the range

Vertical or horizontal, to the same codes.

Pressure vessels for gas and liquid service, built upright on legs, lugs or a skirt, or lying on saddles.

Scroll to open it up.

Vertical vessel01 / 05

1Shell & dished heads
Stainless, duplex and nickel alloys, solid or explosion-bonded clad.
2Nozzles & manway
Orientation reviewed for operation and maintenance.
3Supports
Legs, bracket lugs or a skirt, to suit the plant structure.

Horizontal vessel02 / 05

4Saddle supports
Two saddles with wear plates under the shell.
5Manway
Bolted cover with a davit for handling.
6Nozzles
On the shell and on the heads, to suit your piping.

Jacket or coil03 / 05

7Limpet coil
Half-pipe coil on the shell where the process needs heat transfer.
8Jacket
A conventional jacket as the alternative.

Proven references04 / 05

References, not limits.

Design pressures to about 215 bar, shells to 45 mm thick and vessels to 156 kL and 5,000 mm inside diameter are in our references.

What we build

Pressure vessels by duty.

Receivers

Air, gas and liquid receivers, vertical or horizontal.

Separators

Vessels that part gas from liquid, or one liquid from another.

Process vessels and pots

Vessels and pots built into a process line.

Jacketed and limpet-coil vessels

With a conventional jacket or a limpet coil where the process needs heating or cooling.

High-pressure vessels

Heavy-wall vessels. Design pressures to about 215 bar are in our references.

From our record

References, not limits.

~215 barHighest design pressure
45 mmHeavy-wall shell thickness
156 kLLargest pressure vessel or tank
5,000 mmLargest inside diameter
For engineers who check

Codes, materials and inspection.

  • Codes and standards. ASME Section VIII Div. 1 and 2 with U stamp and National Board registration, EN 13445, PD 5500, AD 2000-Merkblatt with HP0, PED 2014/68/EU and IBR 1950.
  • Materials of construction. Stainless steels including 304L, 316L, 316Ti and 904L; duplex and super-duplex; Hastelloy C-276, C-22 and C-2000; Inconel, Incoloy, Monel, Alloy 20 and nickel; carbon and low-alloy steels, in solid or explosion-bonded clad construction.
  • Inspection, testing and documents. Approved ITP and QAP, stage inspection by third-party agencies, NDE by in-house ASME Level II personnel, PMI on every finished item, hydrostatic or pneumatic testing and a complete dossier with material traceability.

Have a pressure vessel to quote?