Skip to content
02

Heat transfer & separation equipment, sized for your duty.

Shell & tube exchangers, condensers, reboilers, evaporators and distillation columns with internals — designed to TEMA, ASME and EN 13445 in stainless, duplex and nickel alloys.

Send your datasheet Technical details

What we build

Shell and tube heat exchangers with tube sheets
Shell & tube heat exchangers Fixed tube-sheet and U-tube designs to TEMA classes B, C and R, including condensers and reboilers.
Long horizontal distillation column
Columns & towers Distillation, stripper and absorption columns — single segments to 27.8 m delivered.
Chain baffles inside a column
Column internals Chain baffles and column internals fabricated in-house.
Regenerator: top head with nozzles
Regenerators Regenerators and jacketed reactor columns for continuous processes.
From our record — references, not limits

Already built in our works

~1,000 m² Largest heat exchanger
27.8 m Longest single segment Distillation column
3.5 m Ø Tubular reactor, 8,800 tubes Formaldehyde reactor
18.5 m² Explosion-bonded exchanger C-2000 clad
Equipment in this solution

The equipment types behind it.

What we build under this heading, with the page and the detailed enquiry form for each type.

Distillation column

Columns

Distillation, stripping and absorption columns with internals to your process design. Single segments up to 27.8 m have left our works.

  • Distillation columns
  • Stripper columns
  • Absorption columns
  • Packed columns
  • Column internals

Illustration, not to scale

Inside a column

Separation, section by section.

Distillation, stripper and absorption columns with their internals, in stainless, duplex and nickel alloys.

Scroll to open it up.

Shell and skirt01 / 05

1Shell sections
Flanged or welded sections; single segments to 27.8 m delivered.
2Skirt
Skirt support with base ring, anchor chairs and access opening.
3Nozzles & manholes
Nozzle orientation reviewed for operability and maintenance.

Tray section02 / 05

4Trays
Trays and other column internals fabricated in-house.
5Downcomers & weirs
Carry the liquid from each tray to the one below.

Packed section03 / 05

6Packed bed
Random or structured packing on a support grid, held by a bed limiter.
7Liquid distributor
Spreads the reflux evenly over the bed.

Vapour and liquid04 / 05

Counter-current contact.

Vapour rises through the trays and the packing while liquid runs down across them; the internals are reviewed with your process team for operability and maintenance.

  • Vapour, rising
  • Liquid, running down

The whole column05 / 05

Columns and internals from one works.

Designed to ASME Section VIII and EN 13445, inspected stage by stage, and delivered with a complete dossier.

Technical details

For engineers who check: open a panel for the detail behind each claim.

ASME BPVC Section VIII Div. 1 & 2 with U stamp and National Board registration, EN 13445, PD 5500, TEMA, API 650, IS 803, AD 2000-Merkblatt with HP0, PED 2014/68/EU (Annex I 3.1, Module A2 under CE 0045, Module G), ATEX 2014/34/EU and IBR 1950.

Project examples

Exchangers, columns and tubular reactors we have delivered.

Detailed references are available on request.

See all project examples →
  • Formaldehyde tubular reactor, Ø 3.5 m with 8,800 tubes
  • Distillation column, 27.8 m single segment
  • Column, Ø 2.5 m × 26.2 m
  • Heat exchanger of ~1,000 m²
  • Explosion-bonded heat exchanger, C-2000 clad

Have an exchanger or column to quote?

Send the datasheet or drawing — the RFQ form arrives with this solution already selected.

Read about our shell & tube heat exchanger speciality →
Send your datasheet

No datasheet yet? Enter the design data you have, section by section, and we will work out the rest.

Technical enquiry form