
Filters
Pressure filters for solid–liquid separation, with polished contact parts and designs that discharge cleanly and clean easily.
Pressure nutsche filters, pressure filters, leaf filters and pressure-vessel filters for pharmaceutical, agrochemical and specialty-chemical duty.
What we build under this heading, with the page and the detailed enquiry form for it.

Pressure filters for solid–liquid separation, with polished contact parts and designs that discharge cleanly and clean easily.
Illustration, not to scale
Inside a pressure nutsche filter
A pressure nutsche filter, part by part. Pressure filters, leaf filters and filter vessels are built in the same works.
Scroll to open it up.
Pressure body01 / 05
Filter bottom02 / 05
Filtration03 / 05
Gas pressure drives the liquid through the cake, the cloth and the support plate; the solids stay on the cloth and the filtrate leaves through the bottom outlet. Filter area is sized to your batch.
Cover and cake04 / 05
The whole filter05 / 05
Pressure nutsche filters for pharmaceutical, agrochemical and specialty-chemical duty, with polished contact parts and cleanable designs.
For engineers who check: open a panel for the detail behind each claim.
ASME BPVC Section VIII Div. 1 & 2 with U stamp and National Board registration, EN 13445, PD 5500, TEMA, API 650, IS 803, AD 2000-Merkblatt with HP0, PED 2014/68/EU (Annex I 3.1, Module A2 under CE 0045, Module G), ATEX 2014/34/EU and IBR 1950.
Filter area, cake handling and discharge, cloth or mesh support, sealing and cleaning access are reviewed with your process team; contact parts can be mirror-polished or electropolished, with surface roughness (Ra) measured and recorded.
Stainless steels including 304L, 316L, 316Ti and 904L; duplex, super-duplex and hyper-duplex; Hastelloy C-276, C-22 and C-2000; Inconel, Incoloy, Monel, Alloy 20, Sanicro 28 and nickel; carbon and low-alloy steels — in solid or explosion-bonded clad construction, and many more related grades.
Approved ITP and QAP; stage inspection by third-party agencies; RT, UT, PT, MT and VT by in-house ASME NDE Level II personnel; PMI on every finished item; hydrostatic or pneumatic testing; a complete dossier with material traceability.
Detailed references are available on request.
See all project examples →Send the datasheet or drawing — the RFQ form arrives with this solution already selected.
No datasheet yet? Enter the design data you have, section by section, and we will work out the rest.
Technical enquiry form